Ripley MTL/RDL RDTA is the latest project of another successful collaboration between Ambition Mods and The Vaping Gentlemen Club .
Designed with the aim of combining the advantages of a classic dripper with those of an RTA .
Conceived to support the incredible success of the BISHOP MTL RTA with a new atomizer that could replicate its characteristics and at the same time add new ones.
The Ripley was then built to maintain the Bishop's ultra-quiet and stable hit , incredibly easy-to-build deck, and famed aromatic versatility, while adding an even more refined eliquid delivery system and calibrated airflow system to go from the lowest MTL to tight up to the RDL.
As in the Bishop, the deck is immediately accessible by simply uncorking the atomizer. The refill takes place from above thanks to a hole made in the deck. A steel cap is housed in the hole which will allow the tank to be closed, avoiding loss of liquid if the atom is lying down.
Airflow
The same opposing double airflow system of the Bishop RTA is proposed again, further increasing its possibilities by also inserting Air Pins with a greater flow rate.
This system makes it possible to obtain high turbulence inside the chamber and therefore an excellent aromatic yield, while maintaining a laminar flow in and out.
This goal was achieved thanks to the opposing Air Pins and the wide and low vaporization chamber which allows a massive production of vapor while keeping temperatures under control. The Ripley being a RDTA, it has a coil much closer to the drip tip than the Bishop.
To avoid overheating, an extremely efficient through-hole heatsink system was therefore designed which allows the operating temperatures to be kept low and at the same time gives the atomizer a wonderful and immediately recognizable aesthetic.
The large choice of Air Pins, backwards compatible with the Bishop, allows each type of user to find the shot that best suits their needs.
Regeneration Decks
The innovative shapes and features of the Bishop Deck have been maintained, now considered the point of reference for the entire sector in terms of ease of regeneration, perfecting the thread stops to make it even easier, and adding a surprise: directly inside the characteristic "slides" of the cotton the housing holes of the Xylema have been obtained.
The Xylema are stainless steel capillary tubes developed by The Vaping Gentlemen Club and now considered among the best systems for the return of the liquid in the RDTA.
The internal and external diameters of the Xylema and their housings as well as the cups that have been obtained at their base have been carefully calibrated to offer the most reliable power possible. For those who want an even more abundant diet, there are sheets of Mesh which, once properly rolled up, can replace the Xylema, increasing the flow of liquid.
Another distinctive feature of the Bishop is always present on the Deck: the two wells on the sides of the slides that collect the condensation and increase the air vortexes on the sides of the coil.
Characteristics:
- Length: 52.0mm
- Diameter: 22.0mm
- Weight: 45.0g
- Capacity: 3.2ml
- RDTA for MTL and RDL
- Designed by The Vaping Gentlemen Club
- Produced by Ambition Mods
- High-quality workmanship and elegant design
- Material: SS316 Stainless Steel, POM, Glass, Silicone
- Cooling slots with holes on four levels for heat dissipation from the top cap
- Interchangeable 510 drip tips for MTL and RDL included
- Plug connections on top cap and base
- Quick access to the deck by simply removing the top cap
- Compact 2-post single coil deck for MTL and RDL setups
- Liquid feed through "Xylemas" SS304 Capillary or mesh tubing
- Easy teasing
- Glass tank with 3.2ml volume
- Refill via hole on the deck
- 2 opposing vents in the top cap
- AFC pins (2 x 0.8, 2 x 1.0, 2 x 1.6, 2 x 1.8, 1 x blind) replaceable via plug-in system )
- Problem-free replacement of the Air-Pins, even with battery installed and cotton
- Attack 510
Package contents:
- 1x Ambition Mods Ripley MTL/RDL RDTA
- 1x spare glass, 3.2ml
- 1x Drip tip 510 MTL
- 1x 510 RDL drip tip
- 2x Air pins 0.8mm
- 2x Air pins 1.0mm
- 2x Air pins 1.6mm
- 2x Air pins 1.8mm
- 1x Air blind pin
- 2x Rope Xylemas SS304
- 4x meshes
- 1x Spare parts
- 1x Multitool
- 1x Instructions for use