Premade Dual Core Fused Clapton MTL Ni80...
Pre-made Dual Core Fused Clapton 1.0oHm resistors - HellVape are pre-made complex resistors for rebuildable atomizers .
Pre-made Dual Core Fused Clapton 1.0oHm resistors - HellVape are pre-made complex resistors for rebuildable atomizers .
Clapton MTL KA1 1.80oHm Premade Resistors - HellVape are pre-made complex resistors for rebuildable atomizers .
Alien Clapton MTL Ni80 0.63oHm Premade Resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .
Pre-made Micro Fused Clapton MTL Ni80 0.88oHm resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .
UD Youde Titanium Wire 28ga 0.32mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Titanium Wire 26ga 0.40mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Ni200 34ga 0.16mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
UD Youde Ni200 32ga 0.20mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Premade Resistors MTL 26ga Ni80 0.6oHm - Yatchvape are premade resistors for regenerable atomizers .
The 26ga MTL resistors in 0.6oHm Ni80 material are optimized for use on regenerable atomizers with side vape . The coils have an internal diameter of 2.5mm and allow an abundance of cotton in the regeneration phase.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Mesh resistors OFRF NexMesh from 0.15oHm in SS316 with measure 16mm by 6.8mm.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Resistive wire Kanthal A1 28ga 0.32mm UD Youde for regenerable atomizers for electronic cigarettes.
Total length of the coil 10mt
Resistors Mesh NexMesh Turbo A1 Wotofo from 0.13oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
OFRF NexMesh Mesh Resistors with 16mm by 6.8mm measurement.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Vandy Vape Prefact Resistors Superfine Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (30ga x2 + 38ga) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
Resistive wire DOUBLE TWISTED KANTHAL 30ga - roll 0.25mm x 10m.
Coil in double braided wire in Kanthal A1 alloy from 30GA ideal for a cheek vape or for the flavor.
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 26ga for regenerable atomizers.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
Pre-made Dual Core Fused Clapton 1.0oHm resistors - HellVape are pre-made complex resistors for rebuildable atomizers .
Clapton MTL KA1 1.80oHm Premade Resistors - HellVape are pre-made complex resistors for rebuildable atomizers .
Alien Clapton MTL Ni80 0.63oHm Premade Resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .
Pre-made Micro Fused Clapton MTL Ni80 0.88oHm resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .
UD Youde Titanium Wire 28ga 0.32mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Titanium Wire 26ga 0.40mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .
UD Youde Ni200 34ga 0.16mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
UD Youde Ni200 32ga 0.20mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Premade Resistors MTL 26ga Ni80 0.6oHm - Yatchvape are premade resistors for regenerable atomizers .
The 26ga MTL resistors in 0.6oHm Ni80 material are optimized for use on regenerable atomizers with side vape . The coils have an internal diameter of 2.5mm and allow an abundance of cotton in the regeneration phase.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Mesh resistors OFRF NexMesh from 0.15oHm in SS316 with measure 16mm by 6.8mm.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Resistive wire Kanthal A1 28ga 0.32mm UD Youde for regenerable atomizers for electronic cigarettes.
Total length of the coil 10mt
Resistors Mesh NexMesh Turbo A1 Wotofo from 0.13oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
OFRF NexMesh Mesh Resistors with 16mm by 6.8mm measurement.
The new Mesh resistors from OFRF offer faster heating than other types of mesh coils.
Suitable and compatible with Wotofo Profile 1.5.
Vandy Vape Prefact Resistors Superfine Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (30ga x2 + 38ga) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
Resistive wire DOUBLE TWISTED KANTHAL 30ga - roll 0.25mm x 10m.
Coil in double braided wire in Kanthal A1 alloy from 30GA ideal for a cheek vape or for the flavor.
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 26ga for regenerable atomizers.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.