Cotton Bacon PRIME By WICK'N'VAPE 10g
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
LABS RTA MTL Atomizer 22mm - BP Mods is a 22mm rebuildable atomizer produced by BP Mods in collaboration with the MTL Vaping team (Alen Tufekcic etc.), designed to offer a complete MTL experience .
LABS is equipped with 4 different bells that modify the aromatic yield of the vapor and which can be replaced with a special tool included in the package, as well as supplying 6 different air-pins under the coil with fixed airiness (double hole 0.8 - 0.8 – 1.0 – 1.1 – 1.2 – 1.5 mm).
Each bell has a different internal structure and is designed to offer different aromatic yields depending on the liquid used:
The atomizer is completely made of stainless steel and has a frosted polycarbonate tank with a capacity of 2.7ml , which feeds the resistance through a top-down liquid dripping system . The single coil deck is equipped with two recesses on which to place the jig, so as to facilitate regeneration operations, and cross screws. The refilling of the liquid and the opening of the deck take place by removing the tank from below , with a simple uncork.
Available in DLC or Stainless Steel version.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
High quality absorbent material, heat resistant. It should be well wet before use, but once moistened it feeds very well.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
Cloud 9 Cotton is an Australian cotton. 100% cotton of the highest quality. Great for flavor and high wattage lung vape .
The Cloud 9 is characterized by being a 100% natural cotton. No chemical treatment. No bleaching. Neutral flavor.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
Atomizer 8C Tank RTA 22 SXK is the new 2022 rebuildable atomizer for MTL vaping with unique features that make it a worthy companion for daily vaping.
8C Tank has a diameter of 22mm and is recommended for the use of tobacco and flavored flavors . Exploit its full potential with organic tobacco flavors , offering a very high and well-defined aromatic yield.
Wotofo Profile X RTA Atomizer 8ml is the new rebuildable atomizer for lung shooting , the result of meticulous engineering, increasing the performance of the original Profile RTA. With a 8ml tank, the Profile X RTA is a single mesh RTA with the ability to accommodate classic single or dual wire coil setups. This new version also manages the air flow directly from above, avoiding possible liquid spills.
Tsunami 22 RDA Atomizer - GeekVape is a rebuildable competition dripping atomizer with a diameter of 22mm and an improved Velocity Style deck. It uses an air control similar to the Kennedy atomizer and allows you to regenerate in single coil or dual coil with any type of resistance.
Warning: This product is sold at a discounted price and is not covered under warranty. However, before proceeding with the shipment, it is possible to request a video demonstrating the functioning of the device via email.
Pioneer DotRBA DLC Gray Edition by BP Mods is the bridge compatible with DotAIO and similar . The Pioneer is composed of its regenerable deck which offers an experience in MTL and RDL .
In MTL the bridge offers an excellent aromatic yield especially on tobaccos and flavored ones .
Aspire NEKO RTA MTL Atomizer 3.5ml is a rebuildable atomizer for MTL vape designed by Aspire.
The Neeko RTA offers the most expansive options of any MTL tank in the world when it comes to airflow customization . Inside the package there are 12 air pins divided into different diameters, with the possibility of offering up to 49 combinations for the air flow.
PROtocol RBA SXK Bridge Air Pin Set for Billet Box is a spare air pin kit or for SXK\'s SXK RBA.
The kits are composed of spare parts that allow you to modulate the Air Flow Control of the PROtocol RBA.
Wotofo Profile M RTA 4ml is a pure RTA atomizer. With the tank capacity of 3ml ( expandable to 4ml with the bubble glass ) and the well-proven mesh compatible deck, very similar to its predecessors.
The small size of this RTA (24.5 x 27.8mm) means that the vapor travels as little as possible, thus keeping the original aroma of the liquid intact .
Designed for accurate air distribution , this atomizer has a top airflow system that divides through a honeycomb in the internal bell and touches the entire surface of the coil, bringing out all the nuances of flavors.
The Profile M is also designed to be leak-proof , in addition to the exceptional aromatic yield, in fact, this atomizer never leaks!
Nano Kit for Millennium RTA by The Vaping Gentlemen Club composed of the 3 bells and the glass that convert the Millennium into the Nano version. The glass has a capacity of 2ml with top loading (3ml with bottom loading).
Kit compatible with Millennium RTA with traditional Deck (1.0) and Deck 1.1