Resistance RPM40 Triple 0.6oHm SMOK

SMOK
€3.44
Consegna il giorno successivo se ordini entro le 12:00

SMOK RPM40 Triple 0.6oHm SMOK . The SMOK RPM40 Triple resistance from 0.6 to SMOK guarantees a fair amount of steam and a high aromatic yield , suitable for lung shooting. Usable for up to 25W of power .

Quantity
Disponibilità immediata

SMOK RPM40 Triple 0.6oHm SMOK . The SMOK RPM40 Triple resistance from 0.6 to SMOK guarantees a fair amount of steam and a high aromatic yield , suitable for lung shooting. Usable for up to 25W of power .

Package contents:

  • 1x Resistance

I recommend to activate and use the resistance correctly

  1. Turn off the device
  2. Clean the atomizer tank and all its parts, making sure to remove the liquid inside.
  3. Insert 5 - 10 drops of liquid into the central hole of the heating element or into the internal side cotton.
  4. Blot excess liquid inside the center hole with the tip of a tissue. The hole must be free.
  5. Insert the resistance into the atomizer
  6. Fill the tank with the liquid
  7. Perform about 10 - 15 shots without turning on the device . (If the liquid rises from the drip tip, dry the inside of the atomizer with the tip of a tissue until it touches the inside of the resistance)
  8. Turn on the device
  9. Set the minimum power supply (this allows you to avoid possible burns of the resistance if it is not very wet)
  10. Do some light shots
  11. Increase the wattage to the desired wattage
RPM40-0.6

Prodotti correlati

Coils for Electronic Cigarettes Resistance RPM40 MTL Mesh 0.3oHm SMOK
Quickview

Resistance RPM40 MTL Mesh 0.3oHm SMOK

Brands: SMOK
€3.44

SMOK 0.3oHm RPM40 MTL Mesh Replacement SMOK . The 0.3oHm RPM40 MTL Mesh resistance for RPM40 by SMOK guarantees a fair amount of vapor and a high aromatic yield , suitable for an intense cheek shot .

Pod Electronic Cigarettes Pod Tank RPM40 SMOK 4.3ml
Quickview

Pod Tank RPM40 SMOK 4.3ml

Brands: SMOK
€2.47

Pod 4.3ml SMOK RPM40 Replacement Tank. Original SMOK replacement tank compatible with RPM40 kit.

Compatible with SMOK Resistors (No NORD COIL)

8 other products in the same category

Coils for Electronic Cigarettes Coil resistance 0.7 oHm MESH for Aspire Tigon
Quickview

Coil resistance 0.7 oHm MESH for Aspire Tigon

Brands: Aspire
€3.60

Aspire replacement resistance for Tigon Tank. 0.7oHm MESH coil. The 0.7ohm Mesh Coil (20-25W) will have a longer duration of use, will release an incredible flavor and guarantee intense clouds of vapor.

Coils for Electronic Cigarettes TPP DM1 resistance 0.15oHm - Voopoo Coils for Electronic Cigarettes TPP DM1 resistance 0.15oHm - Voopoo
Quickview

TPP DM1 resistance 0.15oHm - Voopoo

Brands: VooPoo
€4.40

Voopoo DM1 Replacement Resistance 0.15oHm for TPP Tank Atomizer (Kit DRAG 3 and DRAG X PLUS)

Mesh resistance type for high power and vapor conduction

Wattage range: 60 - 80W | BEST: 65 - 75W

Coils for Electronic Cigarettes Aspire BP Coils Resistance 0.6oHm
Quickview

Aspire BP Coils Resistance 0.6oHm

Brands: Aspire
€3.52

Aspire BP Coils 0.6oHm resistance is compatible with Aspire atomizers and kits that support the BP Coils series . The BP Coils 0.6oHm guarantees a high aromatic yield with RDL shot.

The 0.16 BP Coil is used for a semi lung vape and allows a wattage adjustment between 15W - 25W .