Pod Resistance POD-S1 1.0oHm - VooPoo

VooPoo
€2.96

Pod Replacement cartridge with Voopoo integrated resistance (for cheek shooting) for Drag Nano Pod .

Resistance type S1 from 1.0oHm.

Quantity
Disponibilità immediata

Pod Replacement cartridge with Voopoo integrated resistance (for cheek shooting) for Drag Nano Pod .

Resistance type S1 from 1.0oHm.


Package Includes:

  • 1x Pod

I recommend to activate and use the resistance correctly

  1. Turn off the device
  2. Remove the cartridge to be replaced
  3. Clean the Pod connectors by wiping away any condensation
  4. Fill the cartridge with liquid
  5. Perform about 20 consecutive shots without inserting the cartridge into the pod. (If the liquid rises from the drip tip, wipe the inside of the cartridge with the tip of a tissue.)
  6. Turn on the device
  7. Set the minimum power supply (this allows you to avoid possible burns of the resistance if it is not very wet)
  8. Do some light shots
  9. Increase the power to the desired power
DRG-NANOPOD

8 other products in the same category

Coils for Electronic Cigarettes Z Series 0.4oHm Coil - GeekVape

Z Series 0.4oHm Coil - GeekVape

Brands: GeekVape
€3.36

Replacement GeekVape GeekVape Z4 0.4 resistance in MESH KA1 for GeekVape GeekVape Tank, also compatible with Obelisk kit.

Recommended power: 50W - 60W

Coils for Electronic Cigarettes DTL / MTL resistance for Innokin Scepter Pod 0.5 oHm Coils for Electronic Cigarettes DTL / MTL resistance for Innokin Scepter Pod 0.5 oHm

DTL / MTL resistance for Innokin Scepter...

Brands: Innokin
€1.84

Resistance Original Innokin replacement head for Scepter Pod Kit . 0.5oHm resistance for a lung or cheek vape.

The output power of the resistance will be automatically set by the Scepter Pod Mod.

Pod Electronic Cigarettes Pod Resistenze Wenax S3 0.8oHm - GeekVape

Pod Resistenze Wenax S3 0.8oHm - GeekVape

Brands: GeekVape
€7.92

Pod Resistors Wenax S Pod 0.8oHm - GeekVape is a pod with integrated resistance compatible with GeekVape \'s Wenax Series kits.

The cartridge features a 2ml tank , easy to fill from the side. It has a built-in 0.8oHm resistance , ideal for intense cheek draw and comes with a replaceable rubber drip tip. Furthermore, it is also compatible with GeekVape cotton filters , already in use on the Wenax M1.

Coils for Electronic Cigarettes Aspire Nautilus BVC Mesh 0.3oHm resistance

Aspire Nautilus BVC Mesh 0.3oHm resistance

Brands: Aspire
€2.96

Aspire Nautilus BVC Mesh 0.3oHm resistance for Aspire Nautilus Series atomizers. Also compatible with Vaptio Cosmo Series atomizers.

The BVC Resistance with 0.3oHm Mesh structure is ideal for those looking for an intense and warm shot, very often comparable to a semi-pulmonary shot but also excellent for high wattage cheek shots .

Usage range: 23 - 28W

Coils for Electronic Cigarettes Resistance SMOK TFV12 Prince - V12 Prince M4 0.17oHm

Resistenze SMOK TFV12 Prince V12 M4...

Brands: SMOK
€11.12

Original SMOK Replacement Coil for 0.17oHm TFV12 Prince Atomizer. Ideal for a high performance and high aromatic yield lung vape.

Power Range: 50-120W | BEST: 80-110W

Pod Electronic Cigarettes VooPoo Doric ITO Series 1.0oHm Resistance Pod

VooPoo Doric ITO Series 1.0oHm Resistance Pod

Brands: VooPoo
€4.00

VooPoo Doric ITO Series 1.0oHm Resistance Pod is a pod with integrated resistance compatible with VooPoo \'s Doric Series electronic cigarettes.

The pod can contain up to 2ml of liquid and inside it houses a 1.0oHm Mesh resistance optimized for MTL cheek draw and guarantees an excellent aromatic yield and a decent vapor supply.