Joyetech EZ 0.4oHm resistance for Exceed Grip

Joyetech
€2.96
Consegna il giorno successivo se ordini entro le 12:00

Joyetech Exceed EZ 0.4oHm resistance for Exceed Grip Series (Exceed Grip, Exceed Grip Pro, Exceed Grip Plus).

Recommended usage power: 20 - 32W

Quantity
Disponibilità immediata

Joyetech Joyetech EZ 0.4oHm resistance for Exceed Grip Series (Exceed Grip, Exceed Grip Pro, Exceed Grip Plus).

Recommended usage power: 20 - 32W


Package contents:

  • 1x Resistance

I recommend to activate and use the resistance correctly

  1. Turn off the device
  2. Clean the atomizer tank and all its parts, making sure to remove the liquid inside.
  3. Insert 5 - 10 drops of liquid into the central hole of the heating element or into the internal side cotton.
  4. Blot excess liquid inside the center hole with the tip of a tissue. The hole must be free.
  5. Insert the resistance into the atomizer
  6. Fill the tank with the liquid
  7. Perform about 10 - 15 shots without turning on the device . (If the liquid rises from the drip tip, dry the inside of the atomizer with the tip of a tissue until it touches the inside of the resistance)
  8. Turn on the device
  9. Set the minimum power supply (this allows you to avoid possible burns of the resistance if it is not very wet)
  10. Do some light shots
  11. Increase the wattage to the desired wattage
EZ-04-JOYTCH

Prodotti correlati

Coils for Electronic Cigarettes Joyetech EZ 0.8oHm resistor for Exceed Grip

Joyetech EZ 0.8oHm resistor for Exceed Grip

Brands: Joyetech
€2.96

Joyetech EZ 0.8oHm resistor for Exceed Grip Series (Exceed Grip, Exceed Grip Pro, Exceed Grip Plus).

Resistance with internal structure in Kanthal for excellent aromatic yield in MTL vape.

Recommended use power: 12 - 20W

8 other products in the same category

Coils for Electronic Cigarettes Vaptio Cosmo C5 1.0oHm Resistance

Vaptio Cosmo C5 1.0oHm Resistance

Brands: VAPTIO
€2.64

Vaptio Cosmo C5 1.0oHm resistance with mesh structure for Vaptio Cosmo atomizers and electronic cigarettes. Vaptio Cosmo resistors are compatible with Aspire Nautilus atomizers and can replace Aspire BVC resistors.

The Vaptio C5 resistance can be used for a cheek vape.

Recommended power range: 8-13W

Pod Electronic Cigarettes Pod Resistors J Series 1.2oHm - GeekVape

Pod Resistors J Series 1.2oHm - GeekVape

Brands: GeekVape
€10.32

Pod Coils J Series 1.2oHm - GeekVape are pods with integrated mesh resistance, specifically designed for the Digi Pro and Max electronic cigarettes by GeekVape . With a 1.2oHm resistance, they offer an ideal cheek to mouth draw for those looking for moderate vapor production similar to traditional cigarettes, with excellent flavor, particularly with tobacco liquids .

Pod Electronic Cigarettes Pod Resistors Aspire Cyber G TG Pod 0.8oHm 2pcs

Pod Resistors Aspire Cyber G TG Pod 0.8oHm...

Brands: Aspire
€6.32

Resistance Pod Aspire Cyber G TG Pod 0.8oHm 2pcs is a pod with integrated resistance compatible with Aspire \'s Cyber G kits.

The cartridge features a 3ml tank , easy to fill. It has an integrated 0.8oHm mesh resistance ideal for an intense cheek pull .

Coils for Electronic Cigarettes Aspire BP Coils Resistance 0.3oHm

Aspire BP Coils Resistance 0.3oHm

Brands: Aspire
€3.52

Aspire BP Coils 0.3oHm resistance is compatible with Aspire atomizers and kits that support the BP Coils series . The 0.3oHm BP Coil is used for lung vaping and allows wattage adjustment between 30W - 40W .

Pod Electronic Cigarettes Resistance Pod with Cotton Filter for Hotcig Kubi 2 Pod Electronic Cigarettes Resistance Pod with Cotton Filter for Hotcig Kubi 2

Resistance Pod with Cotton Filter for...

Brands: Hotcig
€3.76

Replacement resistance / Pod for Hotcig Hotcig KUBI 2 . Pod with cotton filter connector for a similar feel to analog cigarettes.

Pod available in various versions: 1.2oHm , 1.4oHm , 1.6oHm .

Coils for Electronic Cigarettes PnP Resistance X 0.8oHm - VooPoo

PnP Resistance X 0.8oHm - VooPoo

Brands: VooPoo
€3.20

The VooPoo PnP X 0.8oHm coil represents a significant advancement in the world of cheek vaping mesh coils for the VooPoo Drag S2 and Drag X2 devices and compatible PnP X pod tanks .

Recommended power range: 12-15W