Vaping Accessories

Pre-made Fused MTL Ni80 0.85oHm Coils - Crazy Fab Coils are high quality pre-made complex coils for rebuildableatomizers for cheek vaping .

Black Thunder SMALL Cotton - Zeus Vaping Cotton represents an excellent solution for vaping enthusiasts with rebuildable atomizers .

Black Thunder cotton stands out for its superb absorbent capacity, ensuring an optimal vaping experience. Mainly recommended for cheek vaping.

Black Thunder LARGE Cotton - Zeus Vaping Cotton represents an excellent solution for vaping enthusiasts with rebuildable atomizers .

Black Thunder cotton stands out for its superb absorbent capacity, ensuring an optimal vaping experience. Mainly recommended for cheek vaping.

Organic Cotton The Fiber Cotton - Titanium Fiber Cotton is a 100% organic cotton suitable for RDL and DTL regenerable atomizers (pulmonary shot).

The special cotton fiber guarantees a high aromatic yield and resistance to high temperatures. Therefore ideal for regenerable pulmonary systems such as Dripper and Tank.

Pre-made Dual Core Fused Clapton 1.0oHm resistors - HellVape are pre-made complex resistors for rebuildable atomizers .

Alien Clapton MTL Ni80 0.63oHm Premade Resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .

Pre-made Micro Fused Clapton MTL Ni80 0.88oHm resistors - Fumytech are pre-made complex resistors for rebuildable atomizers .

UD Youde Titanium Wire 28ga 0.32mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .

UD Youde Titanium Wire 26ga 0.40mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .

UD Youde Ni200 34ga 0.16mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .

UD Youde Ni200 32ga 0.20mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .

USB Charger Charger for Ego 510 for Electronic Cigarettes with EGO connection . End of the cable with USB connection to be conveniently connected to a wall, PC or car power supply.

Obelisk Fast Charge 65W USB Charger - GeekVape is designed to be used with Geekvape\'s Obelisk 120 box mod to offer a fast/safe charge in just 15 minutes.

UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .

The steel alloy allows for faster activation than Kanthal A1.

USB wall charger 5V-1A 5W - Fumytech is a charger suitable for recharging your devices such as tablets, smartphones and electronic cigarettes requiring low charging power .

Ideal for recharging most of the electronic cigarettes on the market with a built-in battery. 

Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .

Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.

PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .

Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys. 

Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it. 

Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it. 

Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.

The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.

Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.

The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.

Premade Resistors MTL 26ga Ni80 0.6oHm - Yatchvape are premade resistors for regenerable atomizers .

The 26ga MTL resistors in 0.6oHm Ni80 material are optimized for use on regenerable atomizers with side vape . The coils have an internal diameter of 2.5mm and allow an abundance of cotton in the regeneration phase.

Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .

Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .

The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.

Joyetech 50cm USB Type-C cable suitable for recharging your electronic devices , including electronic cigarettes, smartphones and any device with the latest generation Type-C input.

Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.

NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.

Recommended power range: 60-80W

Suitable and compatible with Wotofo Profile 1.5.

2 Slot XTAR MC2 Plus rechargeable battery charger . Dual slot charger for 3.6V / 3.7V lithium-ion batteries with battery level indicator.

Automatic selection of the appropriate charging current (0.5A and 1.0A).

Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.

Coiland Resistance Regeneration Kit is the complete kit that includes everything you need to regenerate your own regenerable atomizer .

It includes multiple high quality tools that will allow you to perfectly regenerate your atomizer. An essential tool for DIY .

28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .

Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.

22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .

UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .