Vaping Accessories
Active filters
Replacement Glass Melo 5 2ml - Eleaf
The Eleaf Melo 5 Replacement Glass 2ml is an essential part for the Eleaf Melo 5 atomizer. This straight glass tank has a capacity of 2ml and allows you to replace the original glass in case of breakage or wear, thus ensuring the continuity of use of the device without having to buy a new atomizer.
Vaporesso iTank T Replacement Glass 3ml
Vaporesso iTank T 3ml Replacement Glass is a replacement tank compatible with the original Vaporesso iTank T atomizer. Straight glass tank with a capacity of 3ml .
Golisi i1 1 Slot Charger
1 Slot Charger Golisi i1 is a single slot smart charger , compatible with most batteries on the market. Small but powerful, it can charge at 2A . The Golisi i1 automatically recognizes the type of battery housed in the slots, Li-ion, Ni-CD, applying the most suitable charging system. The slot is controlled by a microchip that monitors the battery status.
Replacement Glass Tank for Dvarw FL 22 RTA...
Replacement Glass Tank for Dvarw FL 22 RTA - 5ml is an accessory compatible with Dvarw FL 22 RTA atomizer.
This glass tank has a capacity of 5ml , allowing you to easily replace the damaged or worn glass of your atomizer, ensuring a continuous and uninterrupted vaping experience.
Replacement Glass Tank for Dvarw FL 22 RTA...
Replacement Glass Tank for Dvarw FL 22 RTA - 3.5ml is an accessory compatible with the Dvarw FL 22 RTA atomizer.
This glass tank has a capacity of 3.5ml , allowing you to easily replace the damaged or worn glass of your atomizer, ensuring a continuous and uninterrupted vaping experience.
Vaporesso iTank 2 5ml replacement glass
Vaporesso iTank 2 5ml replacement glass for Vaporesso iTank 2 5ml electronic cigarette atomizer .
Original tank with 5ml capacity.
Wrap for 21700 Mod. N5 batteries
Wrap for 21700 Mod. N5 batteries. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for batteries 21700 Mod. N4
Wrap for batteries 21700 Mod. N4. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for batteries 21700 Mod. N3
Wrap for batteries 21700 Mod. N3. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for batteries 21700 Mod. N1
Wrap for batteries 21700 Mod. N1. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap per batterie 18650 Mod. E4
Wrap for 18650 Mod. E5 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E4 batteries
Wrap for 18650 Mod. E4 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E3 batteries
Wrap for 18650 Mod. E3 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Replacement Glass Melo 5 2ml - Eleaf
The Eleaf Melo 5 Replacement Glass 2ml is an essential part for the Eleaf Melo 5 atomizer. This straight glass tank has a capacity of 2ml and allows you to replace the original glass in case of breakage or wear, thus ensuring the continuity of use of the device without having to buy a new atomizer.
Vaporesso iTank T Replacement Glass 3ml
Vaporesso iTank T 3ml Replacement Glass is a replacement tank compatible with the original Vaporesso iTank T atomizer. Straight glass tank with a capacity of 3ml .
Golisi i1 1 Slot Charger
1 Slot Charger Golisi i1 is a single slot smart charger , compatible with most batteries on the market. Small but powerful, it can charge at 2A . The Golisi i1 automatically recognizes the type of battery housed in the slots, Li-ion, Ni-CD, applying the most suitable charging system. The slot is controlled by a microchip that monitors the battery status.
Replacement Glass Tank for Dvarw FL 22 RTA...
Replacement Glass Tank for Dvarw FL 22 RTA - 5ml is an accessory compatible with Dvarw FL 22 RTA atomizer.
This glass tank has a capacity of 5ml , allowing you to easily replace the damaged or worn glass of your atomizer, ensuring a continuous and uninterrupted vaping experience.
Replacement Glass Tank for Dvarw FL 22 RTA...
Replacement Glass Tank for Dvarw FL 22 RTA - 3.5ml is an accessory compatible with the Dvarw FL 22 RTA atomizer.
This glass tank has a capacity of 3.5ml , allowing you to easily replace the damaged or worn glass of your atomizer, ensuring a continuous and uninterrupted vaping experience.
Vaporesso iTank 2 5ml replacement glass
Vaporesso iTank 2 5ml replacement glass for Vaporesso iTank 2 5ml electronic cigarette atomizer .
Original tank with 5ml capacity.
Wrap for 21700 Mod. N5 batteries
Wrap for 21700 Mod. N5 batteries. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for batteries 21700 Mod. N4
Wrap for batteries 21700 Mod. N4. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for batteries 21700 Mod. N3
Wrap for batteries 21700 Mod. N3. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for batteries 21700 Mod. N1
Wrap for batteries 21700 Mod. N1. These shrink wraps are compatible with 21700 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap per batterie 18650 Mod. E4
Wrap for 18650 Mod. E5 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E4 batteries
Wrap for 18650 Mod. E4 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.
Wrap for 18650 Mod. E3 batteries
Wrap for 18650 Mod. E3 batteries. These heat shrink wraps are compatible with 18650 batteries.
The application of the Wrap is very simple, just use a hair dryer to shrink the sheath around the uncovered cell. Before carrying out the wrap it is necessary to remove the damaged film and keep the insulator of the positive.