Refillable Vaping Accessories

UD Youde Titanium Wire 28ga 0.32mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .

UD Youde Titanium Wire 26ga 0.40mm 10 meters is a 10 meters long titanium alloy coil suitable for regenerable cheek and lung atomizers .

UD Youde Ni200 34ga 0.16mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .

UD Youde Ni200 32ga 0.20mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .

UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .

The steel alloy allows for faster activation than Kanthal A1.

Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .

Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.

PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .

Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys. 

Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.

The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.

Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.

The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.

Coiland Resistance Regeneration Kit is the complete kit that includes everything you need to regenerate your own regenerable atomizer .

It includes multiple high quality tools that will allow you to perfectly regenerate your atomizer. An essential tool for DIY .

28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .

Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.

22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .

UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .

UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.

Resistive wire Vandy Vape Superfine MTL Ni80 Fused Clapton Wire 32x2 + 38ga for regenerable atomizers with cheek pull.

Total length of the reel 3mt

Resistive wire Vandy Vape Superfine MTL Kanthal A1 Fused Clapton Wire 32x2 + 38ga for regenerable atomizers with cheek pull.

Total length of the reel 3mt

Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.

Total length of the reel 3mt

Resistive wire Vandy Vape Superfine MTL Ni80 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.

Total length of the reel 3mt

Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.

The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.

Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.

The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.

Resistive wire Kanthal A1 28ga 0.32mm UD Youde for regenerable atomizers for electronic cigarettes.

Total length of the coil 10mt

Resistive wire DOUBLE TWISTED KANTHAL 30ga - roll 0.25mm x 10m.

Coil in double braided wire in Kanthal A1 alloy from 30GA ideal for a cheek vape or for the flavor.

Small size cutting pliers that can be used for remanufacturing, circuit checking, cleaning and making your DIY easier.

Resistive wire of the Vandy Vape in Kanthal A1 26ga for regenerable atomizers.

Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.

A necessary tool for a correct realization of regenerable coils.

Tweezers for regeneration, made of stainless steel with ceramic tip.

Clapton wire coil suitable for MTL coil regenerations.

Clapton wire coil suitable for MTL coil regenerations.