Replacement cap for Vaptio Stilo
Replacement cap for Vaptio Stilo Starter Kit. Spout cap to keep the Stilo drip tip sanitized.
Available in 4 colors.
Active filters
Replacement cap for Vaptio Stilo Starter Kit. Spout cap to keep the Stilo drip tip sanitized.
Available in 4 colors.
510 / EGO adapter for Atomizers with EGO connection (old generation) to 510 for battery box mod. (new generation).
Adapter with convenient ring nut that allows easy removal .
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Dustproof Protective Cap for Pod Mod Innokin EQ FLTR . Protect Innokin FLTR EQ Pod Mod from dirt, germs and bacteria .
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
Replacement Rope for Vampire series atomizers by Oxygene Mods and similar. Fully SS136L steel cables capable of transporting the liquid from the tank to the deck.
Sold in packs of 2 pieces.
Bell Cup Lite Dome for Kayfun Lite 2019. The Dome replaces the upper tank assembly of the Kayfun Lite and gives a unique look to your atom. It also increases the tank capacity. It is available in two different versions.
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
Deck for vZone PRECO 2 DTL and MTL series. The package only includes the deck with air regulation.
A necessary tool for a correct realization of regenerable coils.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
Clapton wire coil suitable for MTL coil regenerations.
Bishop 2 Top Refill Tank 4ml - Ambition Mods is a practical and well-designed accessory for the Bishop 2 MTL RTA. This top fill kit is designed to provide a convenient and efficient solution for adding liquid to your atomizer, greatly improving your overall vaping experience.
Nano Kit Millennium GC - The Vaping Gentlemen Club for the Millennium GC , The Vaping Gentlemen Club has designed an innovative Nano Kit. This kit significantly reduces the size of the atomizer, bringing the tank to 3ml and at the same time offering a renewed style, thanks to a unique aesthetic design and an exclusive drip tip.
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Charger for rechargeable batteries XTAR MC1 Plus. Single slot charger for 3.6V / 3.7V Li-ion batteries.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Compact size and reliability! Protect the charge of your batteries with the automatic charge mode.
High quality absorbent material, heat resistant. It should be well wet before use, but once moistened it feeds very well.
Replacement cap for Vaptio Stilo Starter Kit. Spout cap to keep the Stilo drip tip sanitized.
Available in 4 colors.
510 / EGO adapter for Atomizers with EGO connection (old generation) to 510 for battery box mod. (new generation).
Adapter with convenient ring nut that allows easy removal .
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Dustproof Protective Cap for Pod Mod Innokin EQ FLTR . Protect Innokin FLTR EQ Pod Mod from dirt, germs and bacteria .
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
Replacement Rope for Vampire series atomizers by Oxygene Mods and similar. Fully SS136L steel cables capable of transporting the liquid from the tank to the deck.
Sold in packs of 2 pieces.
Bell Cup Lite Dome for Kayfun Lite 2019. The Dome replaces the upper tank assembly of the Kayfun Lite and gives a unique look to your atom. It also increases the tank capacity. It is available in two different versions.
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
Deck for vZone PRECO 2 DTL and MTL series. The package only includes the deck with air regulation.
A necessary tool for a correct realization of regenerable coils.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
Bishop 2 Top Refill Tank 4ml - Ambition Mods is a practical and well-designed accessory for the Bishop 2 MTL RTA. This top fill kit is designed to provide a convenient and efficient solution for adding liquid to your atomizer, greatly improving your overall vaping experience.
Nano Kit Millennium GC - The Vaping Gentlemen Club for the Millennium GC , The Vaping Gentlemen Club has designed an innovative Nano Kit. This kit significantly reduces the size of the atomizer, bringing the tank to 3ml and at the same time offering a renewed style, thanks to a unique aesthetic design and an exclusive drip tip.
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Charger for rechargeable batteries XTAR MC1 Plus. Single slot charger for 3.6V / 3.7V Li-ion batteries.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Compact size and reliability! Protect the charge of your batteries with the automatic charge mode.
High quality absorbent material, heat resistant. It should be well wet before use, but once moistened it feeds very well.