Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
A necessary tool for a correct realization of regenerable coils.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
Clapton wire coil suitable for MTL coil regenerations.
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Charger for rechargeable batteries XTAR MC1 Plus. Single slot charger for 3.6V / 3.7V Li-ion batteries.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Compact size and reliability! Protect the charge of your batteries with the automatic charge mode.
High quality absorbent material, heat resistant. It should be well wet before use, but once moistened it feeds very well.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
SS316L 24ga UD resistive wire for regeneration, sealed and packaged in a 10 meter reel.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
A necessary tool for a correct realization of regenerable coils.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
Pre-made resistors MTL 28ga Ni80 1.3oHm - Yatchvape are pre-made resistors for regenerable atomizers .
The 28ga MTL resistors in 1.3oHm Ni80 material are optimized for use on regenerable atomizers with cheek vape . The coils have an internal diameter of 3mm and allow an abundance of cotton in the regeneration phase.
Charger for rechargeable batteries XTAR MC1 Plus. Single slot charger for 3.6V / 3.7V Li-ion batteries.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Compact size and reliability! Protect the charge of your batteries with the automatic charge mode.
High quality absorbent material, heat resistant. It should be well wet before use, but once moistened it feeds very well.
