Active filters
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
USB wall charger 5V-1A 5W - Fumytech is a charger suitable for recharging your devices such as tablets, smartphones and electronic cigarettes requiring low charging power .
Ideal for recharging most of the electronic cigarettes on the market with a built-in battery.
Innokin Zlide Top Tank 4.5ml replacement glass for Innokin Zlide Top Tank atomizer. The capacity of the bulbous replacement tank is 4.5ml and allows you to replace your original Innokin tank.
Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .
Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
SXK Mission Booster Drip Tip Kit for Billet Box is a kit consisting of sleeve drip tip with a nut hybrid base for Billet Box or similar AIO systems. Thanks to the nut with grip, you can go and disassemble your nut without using tools , avoiding the risk of scratching the base of your device.
The sleeve is made in POM while the nut structure is in 316 steel .
PEI replacement glass for Kayfun X 24mm RTA MTL in PEI material for Kayfun X Svoemesto or SXK .
Tank capacity 4ml .
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Original Wotofo Profile RDTA 6,2ml Replacement Glass for atomizer Wotofo Profile RDTA . The glass tank has like capacity 6.5ml of liquid .
Original Wotofo M RTA 4ml Replacement Glass for atomizer Wotofo Profile M RTA . The glass tank has like capacity 4ml of liquid .
Original Wotofo M RTA 3ml Replacement Glass for atomizer Wotofo Profile M RTA . The glass tank has like capacity 3ml of liquid .
SMOK TFV8 Baby V2 Replacement Glass and TF Tank 6ml for SMOK atomizers. Glass compatible with SMOK TFV8 Baby V2, TFV-mini atomizers and TF Tank . Bulbar tank with 6ml capacity .
Original Eleaf Ello Duro 6.5ml Replacement Glass for Eleaf Ello Duro Eleaf . Glass also compatible with iJust 3 kits and other kits that use Ello Duro . Bulb tank with 6.5ml capacity .
Knurled Glass for Bishop MTL Tank RTA TVGC 4m l in polycarbonate with knurled effect .
Compatible only with Bishop The Vaping Gentlemen Club 4ml version (Also compatible with Bishop 2ml + 4ml extension kit).
1 meter long USB Type-C cable suitable for charging your electronic devices , including e-cigarettes, smartphones and any device equipped with the latest generation Type-C input.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
SKRR-S Mini Vaporesso 3.5ml replacement glass for SKKR-S Mini atomizer .
Original tank with a capacity of 3.5ml of tank .
Boropad MTL AFC SXK for Billet Box is a compatible Boro Tank accessory for Billet Box and similar AIO Device . The Boropad for Billet Box has a double function: anti-condensation system and air flow reducer . This is the cheek shot (MTL) version.
Boro Unit Tank SXK for RBA Billet Box is a tank with a capacity of 5ml compatible with Billet Box and similar AIO Devices compatible with original Boro.
Boro Tank SXK for Billet Box is a tank with a capacity of 5.5ml compatible with Billet Box and similar AIO Devices compatible with original Boro. Bridge RBA can be installed inside the Boro Tank.
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
415BT V2 Boro Tank SXK for Billet Box is a tank compatible with Billet Box and similar AIO Devices compatible with original Boro. Inside the 415BT V2 Boro Tank you can install Bridge RBA .
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
2 Slot XTAR MC2 Plus rechargeable battery charger . Dual slot charger for 3.6V / 3.7V lithium-ion batteries with battery level indicator.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Replacement glass with tank for Justfog Q16 Pro . This kit allows you to replace the glass of your Justfog Q16 Pro atomizer without removing the glass . In fact, the kit includes the central steel structure of the tank + the 2ml tank .
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
Replacement glass for GeekVape Z Max GeekVape 4ml . Easily replaceable original tank with 4ml liquid capacity .
UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .
The steel alloy allows for faster activation than Kanthal A1.
USB wall charger 5V-1A 5W - Fumytech is a charger suitable for recharging your devices such as tablets, smartphones and electronic cigarettes requiring low charging power .
Ideal for recharging most of the electronic cigarettes on the market with a built-in battery.
Innokin Zlide Top Tank 4.5ml replacement glass for Innokin Zlide Top Tank atomizer. The capacity of the bulbous replacement tank is 4.5ml and allows you to replace your original Innokin tank.
Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .
Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
SXK Mission Booster Drip Tip Kit for Billet Box is a kit consisting of sleeve drip tip with a nut hybrid base for Billet Box or similar AIO systems. Thanks to the nut with grip, you can go and disassemble your nut without using tools , avoiding the risk of scratching the base of your device.
The sleeve is made in POM while the nut structure is in 316 steel .
PEI replacement glass for Kayfun X 24mm RTA MTL in PEI material for Kayfun X Svoemesto or SXK .
Tank capacity 4ml .
Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.
Mesh 100% Made in Germany
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Original Wotofo Profile RDTA 6,2ml Replacement Glass for atomizer Wotofo Profile RDTA . The glass tank has like capacity 6.5ml of liquid .
Original Wotofo M RTA 4ml Replacement Glass for atomizer Wotofo Profile M RTA . The glass tank has like capacity 4ml of liquid .
Original Wotofo M RTA 3ml Replacement Glass for atomizer Wotofo Profile M RTA . The glass tank has like capacity 3ml of liquid .
SMOK TFV8 Baby V2 Replacement Glass and TF Tank 6ml for SMOK atomizers. Glass compatible with SMOK TFV8 Baby V2, TFV-mini atomizers and TF Tank . Bulbar tank with 6ml capacity .
Original Eleaf Ello Duro 6.5ml Replacement Glass for Eleaf Ello Duro Eleaf . Glass also compatible with iJust 3 kits and other kits that use Ello Duro . Bulb tank with 6.5ml capacity .
Aspire Nautilus 3 3ml 22mm replacement glass. Original Aspire tank with 3ml liquid holding capacity.
Knurled Glass for Bishop MTL Tank RTA TVGC 4m l in polycarbonate with knurled effect .
Compatible only with Bishop The Vaping Gentlemen Club 4ml version (Also compatible with Bishop 2ml + 4ml extension kit).
1 meter long USB Type-C cable suitable for charging your electronic devices , including e-cigarettes, smartphones and any device equipped with the latest generation Type-C input.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
SKRR-S Mini Vaporesso 3.5ml replacement glass for SKKR-S Mini atomizer .
Original tank with a capacity of 3.5ml of tank .
Boropad MTL AFC SXK for Billet Box is a compatible Boro Tank accessory for Billet Box and similar AIO Device . The Boropad for Billet Box has a double function: anti-condensation system and air flow reducer . This is the cheek shot (MTL) version.
Boro Unit Tank SXK for RBA Billet Box is a tank with a capacity of 5ml compatible with Billet Box and similar AIO Devices compatible with original Boro.
Boro Tank SXK for Billet Box is a tank with a capacity of 5.5ml compatible with Billet Box and similar AIO Devices compatible with original Boro. Bridge RBA can be installed inside the Boro Tank.
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
415BT V2 Boro Tank SXK for Billet Box is a tank compatible with Billet Box and similar AIO Devices compatible with original Boro. Inside the 415BT V2 Boro Tank you can install Bridge RBA .
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
2 Slot XTAR MC2 Plus rechargeable battery charger . Dual slot charger for 3.6V / 3.7V lithium-ion batteries with battery level indicator.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Replacement glass with tank for Justfog Q16 Pro . This kit allows you to replace the glass of your Justfog Q16 Pro atomizer without removing the glass . In fact, the kit includes the central steel structure of the tank + the 2ml tank .
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
Replacement glass for GeekVape Z Max GeekVape 4ml . Easily replaceable original tank with 4ml liquid capacity .
