UD Youde Ni200 32ga 0.20mm 10 meters is a 10 meters long Nickel 200 alloy coil suitable for rebuildable MTL atomizers .

Samsung 50S 21700 5000mAh 35A battery is a flat pole battery used as a cell forelectronic cigarettes that support the 21700 type . Can also be used in other devices or in series for battery packs.

There are many quality grades of this cell, we choose the Premium Quality A+++ which is the best in terms of autonomy over time and safety.

18650 Battery Wrap - Pizza with a stylized graphic of a pizza.

18650 Battery Wrap - Alien with stylized alien graphic.

Battery Wrap 18650 - Vendetta with graphics from the movie " V for Vendetta ".

Boro Tank Replacement Frame for S-ProRo SXK for Billet Box is a high quality component designed especially for S-ProRo SXK Boro Tank for Billet Box.

To use the frame you need the S-ProRo SXK tank (sold separately) or the Complete Kit.

Boro Tank Replacement Tank for S-ProRo SXK for Billet Box is a high performance tank, compatible with S-ProRo SXK frame and specially designed for Billet Box AIO and compatible with most AIO on the market with Boro Tank .

Boro Tank S-ProRo SXK for Billet Box is a high performance tank, specially designed for Billet Box AIO and compatible with most AIO on the market with Boro Tank .

UD Youde SS316L 30ga 0.25mm 10 meters is long stainless steel alloy coil 10 meters suitable for regenerable cheek atomizers .

The steel alloy allows for faster activation than Kanthal A1.

Curved tip ceramic tweezers mainly used to separate the coils of the resistances in regenerable atomizers. Also convenient for placing cotton .

Ceramic tipped tweezers are not conductors of heat and electricity , therefore their use in positioning resistors is best.

PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .

Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys. 

Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it. 

Cotton Pro Cotton 2.5mm - BP Mods is an organic cotton ready to be inserted into resistances with a diameter of approximately 2.5mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it. 

Transparent bottle with 500ml safety cap convenient for mixing the neutral base with or without nicotine together with your favorite flavors.

The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .

Transparent bottle with safety cap 1 liter convenient for mixing the neutral base with or without nicotine together with your favorite aromas.

The PETG bottle is supplied together with the safety cap that allows you to seal the container, as well as a convenient removable dropper .

SXK Mission Booster Drip Tip Kit for Billet Box is a kit consisting of sleeve drip tip with a nut hybrid base for Billet Box or similar AIO systems. Thanks to the nut with grip, you can go and disassemble your nut without using tools , avoiding the risk of scratching the base of your device.

The sleeve is made in POM while the nut structure is in 316 steel .

Mesh 200 Superfine SS316L 300x200mm - ZIVIPF is a Mesh 200 sheet made of SS316L material - size 300x200mm (A4 sheet ) for genesis or similar mesh atomizers.

Mesh 100% Made in Germany

Battery 18650 Vap Procell 3500mAh 25A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.

Battery 18650 Vap Procell 3000mAh 30A it is a flat pole battery used as a cell forelectronic cigarettes that support the 18650 type . Can also be used in other devices or in series for battery packs.

Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.

The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.

Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.

The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.

Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .

IMR Efest 3500mAh 20A 18650 battery is a flat pole battery used as a cell for electronic cigarettes which support 18650 type . Can also be used in other devices or in series for battery packs.

Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.

NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.

Recommended power range: 60-80W

Suitable and compatible with Wotofo Profile 1.5.

The Sony VTC6A 18650 3000mAh and 25A battery represents excellence in the world of electronic cigarette batteries, offering an optimal combination of duration and power for vaping enthusiasts. With a capacity of 3000mAh and a nominal voltage of 3.7V , this IMR type lithium ion battery is ideal for powering a wide range of Box Mods, both electronic and mechanical.

Boropad MTL AFC SXK for Billet Box is a compatible Boro Tank accessory for Billet Box and similar AIO Device . The Boropad for Billet Box has a double function: anti-condensation system and air flow reducer . This is the cheek shot (MTL) version.

Boro Unit Tank SXK for RBA Billet Box is a tank with a capacity of 5ml compatible with Billet Box and similar AIO Devices compatible with original Boro.

Boro Tank SXK for Billet Box is a tank with a capacity of 5.5ml compatible with Billet Box and similar AIO Devices compatible with original Boro. Bridge RBA can be installed inside the Boro Tank.

The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.

415BT V2 Boro Tank SXK for Billet Box is a tank compatible with Billet Box and similar AIO Devices compatible with original Boro. Inside the 415BT V2 Boro Tank you can install Bridge RBA .

The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.

28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .

Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.

UD Youde Kanthal A1 resistive wire 26ga (0.40mm). Kanthal alloy coil 10 meters long suitable for regenerable cheek and lung atomizers .