Active filters
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
SXK Mission Booster Drip Tip Kit for Billet Box is a kit consisting of sleeve drip tip with a nut hybrid base for Billet Box or similar AIO systems. Thanks to the nut with grip, you can go and disassemble your nut without using tools , avoiding the risk of scratching the base of your device.
The sleeve is made in POM while the nut structure is in 316 steel .
Neck strap Electronic cigarette holder necklace - Galactika for pen-shaped electronic cigarettes or disposable cigarettes . Reinforced fabric strap with comfortable silicone musket ring.
Ring diameter 16mm (compatible with most of the pens in circulation such as Kiwi , Zeep etc ...)
Voopoo silicone cover for DRAG S Kit. It protects the kit from bumps, falls and scratches. It also includes a pod cover and drip tip cap .
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
1 meter long USB Type-C cable suitable for charging your electronic devices , including e-cigarettes, smartphones and any device equipped with the latest generation Type-C input.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
KIWI Silicon Case Silicone Case for KIWI VAPOR - 2022 Version for Kiwi Vapor Electronic Cigarette.
Give a touch of color to your KIWI with the silicone covers!
More colors and an even more resistant material that protects against scratches and bumps , adapting perfectly to the shape of the Powerbank. A rainbow of colors to elegantly protect the KIWI Powerbank. Protects from scratches and falls, easy to apply and remove .
Create infinite combinations and exclusive looks for your electronic cigarette.
Car Electronic Cigarette Case convenient to use during your travels by car or other. Perfect for keeping your electronic cigarette always at hand . Solid, stable and discreet, the electronic cigarette holder for cars attaches to the horizontal air intakes of your car.
Boropad MTL AFC SXK for Billet Box is a compatible Boro Tank accessory for Billet Box and similar AIO Device . The Boropad for Billet Box has a double function: anti-condensation system and air flow reducer . This is the cheek shot (MTL) version.
Boro Unit Tank SXK for RBA Billet Box is a tank with a capacity of 5ml compatible with Billet Box and similar AIO Devices compatible with original Boro.
Boro Tank SXK for Billet Box is a tank with a capacity of 5.5ml compatible with Billet Box and similar AIO Devices compatible with original Boro. Bridge RBA can be installed inside the Boro Tank.
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
415BT V2 Boro Tank SXK for Billet Box is a tank compatible with Billet Box and similar AIO Devices compatible with original Boro. Inside the 415BT V2 Boro Tank you can install Bridge RBA .
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
UD Youde Zeep 2 PCC Powerbank silicone cover dedicated to the Zeep 2 PCC Powerbank available in 3 colors and essential for the protection of the PCC from impacts and dirt .
2 Slot XTAR MC2 Plus rechargeable battery charger . Dual slot charger for 3.6V / 3.7V lithium-ion batteries with battery level indicator.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
UD Youde Kanthal A1 resistive wire 26ga (0.40mm). Kanthal alloy coil 10 meters long suitable for regenerable cheek and lung atomizers .
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Charger for rechargeable batteries XTAR MC1 Plus. Single slot charger for 3.6V / 3.7V Li-ion batteries.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Compact size and reliability! Protect the charge of your batteries with the automatic charge mode.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
PLATO 170 wire cutters are professional nippers for cutting thick wires in metal alloys .
Used in the vaping sector to cut resistive wires, but also in other sectors always for the use of cutting metal alloys.
Cotton Cotton Pro 3mm - BP Mods is an organic cotton ready to be inserted into heating elements with a diameter of approximately 3mm . Possibility of reducing the diameter of the cotton flap by delicately thinning it.
SXK Mission Booster Drip Tip Kit for Billet Box is a kit consisting of sleeve drip tip with a nut hybrid base for Billet Box or similar AIO systems. Thanks to the nut with grip, you can go and disassemble your nut without using tools , avoiding the risk of scratching the base of your device.
The sleeve is made in POM while the nut structure is in 316 steel .
Neck strap Electronic cigarette holder necklace - Galactika for pen-shaped electronic cigarettes or disposable cigarettes . Reinforced fabric strap with comfortable silicone musket ring.
Ring diameter 16mm (compatible with most of the pens in circulation such as Kiwi , Zeep etc ...)
Voopoo silicone cover for DRAG S Kit. It protects the kit from bumps, falls and scratches. It also includes a pod cover and drip tip cap .
Vandy Vape Ni80 Mesh Wire 100mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 1.2oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Vandy Vape KA1 Mesh Wire 80mesh 1.5 meters is a mesh coil used to regenerate atomizers with Mesh.
The resistance value is 2.8oHm every 0.30 cm . For an accurate cut, calculate how many ohms are needed. We recommend the first resistance reading on an electronic box mod.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
1 meter long USB Type-C cable suitable for charging your electronic devices , including e-cigarettes, smartphones and any device equipped with the latest generation Type-C input.
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
KIWI Silicon Case Silicone Case for KIWI VAPOR - 2022 Version for Kiwi Vapor Electronic Cigarette.
Give a touch of color to your KIWI with the silicone covers!
More colors and an even more resistant material that protects against scratches and bumps , adapting perfectly to the shape of the Powerbank. A rainbow of colors to elegantly protect the KIWI Powerbank. Protects from scratches and falls, easy to apply and remove .
Create infinite combinations and exclusive looks for your electronic cigarette.
Car Electronic Cigarette Case convenient to use during your travels by car or other. Perfect for keeping your electronic cigarette always at hand . Solid, stable and discreet, the electronic cigarette holder for cars attaches to the horizontal air intakes of your car.
Boropad MTL AFC SXK for Billet Box is a compatible Boro Tank accessory for Billet Box and similar AIO Device . The Boropad for Billet Box has a double function: anti-condensation system and air flow reducer . This is the cheek shot (MTL) version.
Boro Unit Tank SXK for RBA Billet Box is a tank with a capacity of 5ml compatible with Billet Box and similar AIO Devices compatible with original Boro.
Boro Tank SXK for Billet Box is a tank with a capacity of 5.5ml compatible with Billet Box and similar AIO Devices compatible with original Boro. Bridge RBA can be installed inside the Boro Tank.
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
415BT V2 Boro Tank SXK for Billet Box is a tank compatible with Billet Box and similar AIO Devices compatible with original Boro. Inside the 415BT V2 Boro Tank you can install Bridge RBA .
The refill of the liquid takes place by moving the supplied glass and inserting the tip of the bottle inside it.
UD Youde Zeep 2 PCC Powerbank silicone cover dedicated to the Zeep 2 PCC Powerbank available in 3 colors and essential for the protection of the PCC from impacts and dirt .
2 Slot XTAR MC2 Plus rechargeable battery charger . Dual slot charger for 3.6V / 3.7V lithium-ion batteries with battery level indicator.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
UD Youde Kanthal A1 resistive wire 26ga (0.40mm). Kanthal alloy coil 10 meters long suitable for regenerable cheek and lung atomizers .
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Charger for rechargeable batteries XTAR MC1 Plus. Single slot charger for 3.6V / 3.7V Li-ion batteries.
Automatic selection of the appropriate charging current (0.5A and 1.0A).
Battery charger working via Micro-USB cable (included) by connecting it to any 1A or higher wall adapter.
Compact size and reliability! Protect the charge of your batteries with the automatic charge mode.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
