Active filters
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
Internal Panels Kraken Cthulhu AIO Box - Cthulhu Mods . The Kraken interior panels are replacement doors of the internal side of the battery that replace the originals, giving an extra aesthetic touch to your AIO Box.
Cthulhu AIO Box Fire Button - Cthulhu Mods is a replacement Fire Button for the Cthulhu AIO Box. Thanks to this fire button you will give an extra aesthetic touch to your device.
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
UD Youde Kanthal A1 resistive wire 26ga (0.40mm). Kanthal alloy coil 10 meters long suitable for regenerable cheek and lung atomizers .
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Spongebox Protective Ring for electronic cigarettes with atomizers of various diameters. The Spongebox Protective Ring is a protective measure for those who want to safeguard the health of their device .
The Spongebox, placed halfway between the box mod and the atomizer, allows you to absorb liquid from any leaks.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Door for DotAIO Original DotMod Kit. The dotAIO spare door is characterized by a structure completely in aluminum alloy , with laser engraving and magnetic attachment.
Designed to fit and work perfectly on the dotMod dotAIO .
Customize your AIO with fantastic textures that will make your experience with DotAIO unique and colorful.
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Protection Ring with Superhero fantasy for electronic cigarette atomizers .
Available in various diameters .
The selection of color and symbol is random among those in the photo.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
Necklace with ring to comfortably carry your electronic cigarette with you. Different diameters available with ring and lanyard.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
JustFog silicone ring with 14mm diameter to protect the 14 series atomizers and other 14mm thick atomizers.
A necessary tool for a correct realization of regenerable coils.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
Clapton wire coil suitable for MTL coil regenerations.
Wick 100% Organic Cotton BIO 3mt 2mm - Jimdo are cotton flaps (wick) used to regenerate old generation atomizers or resistances. The Wicks are 100% Organic Organic Cotton and each pack includes flaps for a total of 3 meters , with a cotton diameter of 2mm .
Pre-made coils in Ni80 Dovpo are pre-made resistors for DTL regenerable atomizers , introducing a different and complete taste experience for DIY.
NexMesh Wotofo Extreme A1 0.16oHm resistors with 17x8.5mm size.
Recommended power range: 60-80W
Suitable and compatible with Wotofo Profile 1.5.
Internal Panels Kraken Cthulhu AIO Box - Cthulhu Mods . The Kraken interior panels are replacement doors of the internal side of the battery that replace the originals, giving an extra aesthetic touch to your AIO Box.
Cthulhu AIO Box Fire Button - Cthulhu Mods is a replacement Fire Button for the Cthulhu AIO Box. Thanks to this fire button you will give an extra aesthetic touch to your device.
Silicone drip tip cover with protective glass ring for electronic cigarettes. Conveniently protect your tank and drip tip from dirt and dust.
The silicone spout cap is equipped with an extendable rubber band which makes it compatible with many electronic cigarettes.
The diameter of the vape band is 20mm.
28ga (0.32mm) Youde Ni80 UD Youde resistive wire. 10 meters long nickel alloy coil suitable for regenerable cheek and lung atomizers .
Nickel wire has a low temperature coefficient of resistance and low change in resistance over its life which combine to ensure faster heat-up times , smoother operating temperatures, and longer life.
UD Youde Kanthal A1 resistive wire 26ga (0.40mm). Kanthal alloy coil 10 meters long suitable for regenerable cheek and lung atomizers .
22ga (0.64mm) UD Youde resistive wire. Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde resistive wire 24ga (0.50mm). Kanthal alloy coil 10 meters long suitable for regenerable lung atomizers .
UD Youde 28ga (0.32mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
UD Youde 26ga (0.40mm) UD resistive wire. Coil in 316L steel alloy 10 meters long suitable for regenerable cheek and lung atomizers . The steel alloy allows for faster activation than Kanthal A1.
Spongebox Protective Ring for electronic cigarettes with atomizers of various diameters. The Spongebox Protective Ring is a protective measure for those who want to safeguard the health of their device .
The Spongebox, placed halfway between the box mod and the atomizer, allows you to absorb liquid from any leaks.
Resistive wire Vandy Vape Superfine MTL SS316 Fused Clapton Wire 30x2 + 38ga for regenerable atomizers with cheek pull.
Total length of the reel 3mt
Door for DotAIO Original DotMod Kit. The dotAIO spare door is characterized by a structure completely in aluminum alloy , with laser engraving and magnetic attachment.
Designed to fit and work perfectly on the dotMod dotAIO .
Customize your AIO with fantastic textures that will make your experience with DotAIO unique and colorful.
Straight tip pliers in ceramic and steel useful for regenerating your own regenerable atomizers and for assembling circuits.
The pliers are equipped with ceramic tips to avoid false contact with the resistances during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Vape Tweezer Coil Master Ceramic Tongs. Useful for regenerating your own regenerable atomizers.
The Tweezer pliers are equipped with ceramic tips to avoid false contact with the resistors during the positioning of the cotton. In addition, the ceramic pliers support very high heat.
Resistors Mesh NexMesh Chill A1 Wotofo from 0.15oHm with measuring 16mm by 6.8mm.
Suitable and compatible with Wotofo Profile 1.5.
Protection Ring with Superhero fantasy for electronic cigarette atomizers .
Available in various diameters .
The selection of color and symbol is random among those in the photo.
Wotofo Prefact Resistors Dual Core Fused Clapton type for Rebuildable Cheek Atomizers . Resistors in Ni80 (Nickel80) with a diameter between 2.5.
Excellent for a high performance and high aromatic cheek vape.
The Cotton Bacon V2.0 by Wick \'n\' Vape was made for the most passionate vapers! Made in America and is 100% tasteless!
Necklace with ring to comfortably carry your electronic cigarette with you. Different diameters available with ring and lanyard.
Resistive wire of the Vandy Vape in Kanthal A1 for regenerable atomizers.
JustFog silicone ring with 14mm diameter to protect the 14 series atomizers and other 14mm thick atomizers.
A necessary tool for a correct realization of regenerable coils.
Wick \'N Cotton 10g Cotton Bacon Prime is a more compact and combed high speed absorbent cotton that is extremely easy to use.
Tweezers for regeneration, made of stainless steel with ceramic tip.
